Solder Paste (Sn 62.8%,Pb 36.8%,Ag 0.4%),183℃ Soldering Paste(30g),Liquid Solder For Electronics, for PCB/IC/BGA/Chip/SMD/Phone CPU Repairing
Description Image
Reviews & Ratings
- Jeff662024-06-28Great for small jobs or rework
While I use a solder template and a jar of solder paste for most PCB assembly, I use a squeeze tube of solder paste for prototypes, small jobs, and rework. I ordered this to try because my current tube is almost empty. Three tip sizes were included with this tube – two of each size metal tips, and a plastic tip. The plastic tip has the smallest nozzle, so I chose that. It worked better than the one I had used previously because of the tiny nozzle. The nice thing about the plastic tip is I can screw on a small wire-nut to seal it until the next time. For quick test I applied small dots of paste on a pair of pads, dropped on a 0805 resistor, and heated with low-flow hot air. The solder melted in a few seconds and centered the resistor on the pads. This worked perfectly at a great price, and I recommend trying it.
- R Weese2024-06-28Makes my life so easy.
This solder paste is a life saver for me. It makes it easier due to the mix of Sn 62%, Pb 36.8%, ag 0.4%, and a melting point of 361.40°.They give you a variety of tips which I clean and reuse easily. The one thing I would like to see is a way to store the set so as to not allow the paste to go to waste or mess up the work area or have this come in a small container box to protect it, which I would gladly pay a little more. All in all, this is a super paste and works better than I thought it would, I was very happy with this product and I will be ordering more, and would recommend it to anyone. It's well worth the price.
- db2024-07-01A touch of silver
Great big 30g tube of leaded solder paste with a touch of silver. With a low melt temperature of 183C this is great for when you cannot have the heat too high, because you will melt plastic components like the insides of some charging ports. This also helps mix with non leaded solder to facilitate removal of components that have large thermal pads. Good to have in your kit and a great deal on top of it. Recommended.
- john2024-07-02Great Paste, Perfect for what I needed!
This paste was perfect for my re-flow projects. It also came in handy for tinning 30g wire for harness building. Great Stuff! highly recommend for the uses I have tried!
- Chris2024-06-24Works extremely well
Works great for tinning pads, SMD hot air reflow work, and i usually use this stuff to aid in cleaning up BGA pads.. just smear a little of this stuff on, run over everything to reduce the temp needed for the old lead-free solder, then give it a once over with solder braid to clean everything up.