This pump is quick and easy to set up and it pumps out the water really fast. It makes it so much easier to remove the pool cover. They claim that it will remove 450 gallons an hour and I believe them. It made very short work of the water in my pool cover. It's great. I love this pump. Highly recommended.

Simple math, P=VI, 120V*3.3A=400W, 1HP = 745W.

Pump works as described. I know it says it's for a pool cover, but I'm using it a a small pool itself. My daughters pool has a drain plug that sits about 3 inches above the bottom. So needless to day, it leaves some water behind when draining. This little pump is perfect for getting that remaining water out. There were quite a few leaves in the bottom as well, but the guard around the intake kept them all out. I did have to stop and remove a few by hand, because they blocks some water flow, but otherwise it worked well. It has 3 different fittings for various hose sizes, and the hose included does work just fine. I had to adapt a garden hose to it, because I needed to move the water out further behind my garage. Not a difficult task if you have basic knowledge of things like that. All in all, good pump. I like it.

There are several pool cover pumps I've used for a couple years, but this design seems to be the most reliable. I was using a different pump at the beginning of Fall that was bulkier and didn't have great suction. That one literally burned up in February. I still needed a pump to get me through two months; so I turned to this inexpensive pump. It's smaller that the other one I had, but has better suction. It's been a lifesaver to have this pump.

Pump works effectively and quietly. I've been using mine to pump my wading pool through a 1 micron filter, and it has been working perfectly. Great price, and a great upgrade to help keep a large wading pool/small above ground/hot tub clean with a filtration set up.

I have a few of these pumps. They are small and will do what they are marketed as. That is short time use. If you want to use this for continuous use you will get more life out of this if you keep the inlet clear of anything that may impede the impeller. I have mine inside the clean side of a pond filter. It runs 4 hours on and 2 hours off 24 hours a day. As long as I check the pump daily for debris the pump will last about a year. This pump sits in a colored case or basket. Leave it in the basket. It will keep out the large debris but the small stuff that gets past can clog the impeller or the discharge hose. I stuff the basket with a porous filter material and then sit the pump upright on a foam pad. All this keeps debris out of the pump and helps it last longer. Cheers

I recently ordered the Qiomala 75W Submersible Swimming Pool Cover Pool Pump to replace the full-sized pump that I was previously using for the job. One of the best things about this pump is that it comes with 25 FT of hose (tubing, actually), which makes it ready to use out of the box. Additionally, it also comes with two other adapters to use with other hosing. This pump is far more suited to the job as it collects from all sides without getting clogged, and I was surprised at how quietly it runs. I have even connected it to a smart outlet that enables me to turn it on and off without going outside.

Super quiet and very lightweight. Great flow of water. All around just great pump. Easy to us.

I can't say yet for how long this will last but we had a large amount of water and debris on the pool cover. I simply tossed it on the cover, after hooking it up of course, and it knocked it out. It clogged a couple of times, it was easily cleared and self primed easily. Very happy, next off season I plan to use it throughout the off season.

Qiomala 75 watt 450 gph subnersible pump works great ....pump has very strong suction and powerful output......comes with handy hose and three adapters to make several task easier and manageble....cord is extremely long....very durable and effective pump....definitely worth the asking price